The Most Common Causes of Roof Leaks

Panama City roofers

Almost every roof gets at least one leak during its lifetime. Roof leaks are among the most common roofing repairs completed by reliable Panama City roofers.There are many causes that can lead to unwanted water underneath the roof surface – here are some:

  • Damaged flashing – the thin pieces of material installed around roof openings serve the purpose of fortifying the roof where its continuity has been broken. If the flashing becomes cracked or a gap develops between the flashing and the roof surface, water can seep through. If your leak is around your skylights or your chimney, the first place to look for the source is around the flashing stripes;
  • Broken roof covering materials – shingles and tiles can take a lot of beating from the elements, but cracks still happen. The issue is easy to spot – in most cases, cracked components can be noticed from the ground;
  • Clogged gutters – leaves, twigs, feathers and other forms of debris can prevent your gutters from directing water away from the roof and the walls and clogged gutter might cause water damage in the roof and in the home as well. The problem is easy to solve: scrape out any dirt that might cause clogging.

First Posted on: The Most Common Causes of Roof Leaks

Comments

Post a Comment

Popular posts from this blog

Can You Finish a Roof Replacement in Rainy Weather?

Image
Most roofing jobs need to stop when it starts raining – even if you are desperate to get the project completed, you will need to accept that rainy days cause delay. Safety conscious Pensacola roofing contractors will stop work if rain starts and so should you if you have decided to do some roof work on your own. However, there are several good ways to maintain efficiency and safety, whatever weather comes along: Check the long-term forecast as well as for the next few days before you start any roofing project – weather forecasts are not always 100% reliable, but they can give you a clue about the chances of getting rain while your roofing project is under way; Removing only as much of the old roof in one go as can be replaced during the day – while removing the entire old roof and proceeding to the installation of the new material only afterward seems like a good idea, good roofers do not remove more of the old material than they can replace in one day; Having large sheets of fo...
Read more

How to Inspect Your Roof After a Storm

Image
Storms may happen in any season and require a roof inspection, to make sure the bad weather did not cause damage. Water infiltration under the roof indicates that somewhere the roof is damaged. However, not all leaks are as obvious as you may think, as wet stains that appear on the ceiling are not necessarily exactly below the roof area that allowed the infiltration. The roof will need to be checked both inside and out. Depending on the type of roof, verify if there are displaced covering materials, cracks or uncovered spaces. In addition, check the gutters and downspouts; they must not have loose, deformed or cracked elements. The area under the eaves must also be in good shape, with no visible damage. Last but not least, pay close attention to checking the areas around skylights or dormer windows, chimneys, roof vents, solar panels mounted on roofs, satellite dishes etc., as they are generally the most vulnerable and favor most water infiltration. If you have an old roof that ha...
Read more

The Benefits of Single Ply Roofing Systems for Commercial Buildings

Image
Single-ply roofing systems consist of flexible sheets of plastic-derived materials and are used on the flat roofs most commonly seen on commercial buildings. The three main types of single-ply systems are TPO (Thermoplastic Polyolefin), PVC (Polyvinyl Chloride) and EPDM (Ethylene Propylene Diene Monomer), all of them prefabricated membranes that undergo serious testing procedures and quality checks to ensure durability. Single-ply systems enjoy great popularity these days – here are some of the qualities that make them so appreciated: Quick and easy installation – whether attached mechanically, ballasted or welded, single-ply systems take a very short time to install, thus reducing the workmanship costs related to the process; Easy maintenance – the synthetic membranes can be cleaned easily, without any specialized knowledge or special tools; Durability and weather resistance – single-ply membranes can stand up to extreme weather and they can last for decades without any major pr...
Read more